Cryorig Unveils Mac Pro-Like PC Case for Gaming PCs, Ultra ...

Home

>

Cases/Cooling/PSUs

Cryorig Unveils Mac Pro-Like PC Case for Gaming PCs, Ultra-Slim Desktop Chassis

by

Anton Shilov

on May 26, 2016 5:45 PM EST

Posted in

Cases/Cooling/PSUs

cryorig

Ola

Taku

16

Comments

|

Add A Comment

16

Comments

+ Add AComment

Cryorig has announced its new cylindrical PC chassis, which enables system makers and enthusiasts to build Mac Pro-styled gaming computers. The new case can house one graphics card and a mini-ITX motherboard. While the chassis can formally support a variety of components, actual capabilities of such PCs will be limited by PSUs and cooling. The Ola PC case will only hit the market in 2017. In addition, Cryorig announced its ultra-slim desktop chassis called Taku.

Ola: Designed for Gamers, Inspired by Mac Pro

The Cryorig Ola PC chassis can house an SFX power supply unit, a motherboard in mini-ITX form-factor, a typical full-height high-end graphics card (up to 280 mm in length), one 3.5” HDD as well as one or two 2.5” storage devices. The chassis is divided into two compartments: one for the motherboard with the CPU as well as storage devices, another for the graphics card. Inside, Cryorig’s Ola has a rather sophisticated internal cooling system that relies on one big 140 mm fan and two shark-gill like side air intake ducts (one for each compartment) that run the length of the case and let in cool air from the outside. Components like CPU and GPU will have to use their own cooling solutions.

At present, Cryorig does not reveal anything about the maximum TDP of a GPU that the Ola chassis can house, but claims that the maximum TDP of its CPU should not be higher than 100 W, which is enough for non-overclocked Intel Core i7 K-series processors in LGA1151 packaging, but which does not give any headroom for overclocking. The 100 W limitation is likely conditioned by supported cooling system, which cannot be higher than 72 – 82 mm and its top cannot be larger than 92×92 mm. In its press materials, Cryorig shows off its Ola chassis with NVIDIA’s GeForce GTX 1080 graphics card, which consumes up to 180 W. Hence, it should be possible to build a fairly powerful PC using the Ola.

On the aesthetics end, the Ola features a modular front and back panel for multiple textured options. Right now, the company considers brushed aluminum and wood veneer, but when the product hits the market, other options could emerge. Due to its cylindrical form-factor and a tricky internal architecture, the Ola from Cryorig will have a limited amount of external connectors, including at least one for display, audio input/output, a USB 3.0 and so on.

Cryorig Ola: Quick Specs

Dimensions (W×H×D)

226 mm × 378.5 mm × 205 mm

Weight

5 kilograms

Motherboard Form-Factor

Mini ITX

PSU Form-Factor

SFX

3.5" Drive Bays

1

2.5" Drive Bays

1 or 2

System Fan

120 mm

CPU Cooler Dimensions

Up to 72~82 mm in height

Graphics Card Length

280 mm

PSU Length

130 mm

External Connectors

Power, Audio, USB 3.0, Display

Cryorig started to work on the Ola only recently and the chassis is still a work in progress, which is why the company keeps the final specs. The maker hopes to release Ola sometimes in Q2 2017, about a year from now. The early prototypes will be on display at Computex trade show next month.

Gallery:

Cryorig Ola

Taku: Neat, Slim, Holds Your Display

Next up is the Cryorig Taku ultra-slim desktop, which is made of 3 mm thick aluminum and which can be used as a display stand. The internal architecture of the Taku is rather simple: it has one sliding drawer, which can house a mini-ITX motherboard with a CPU, a graphics card (which is no longer than 240 mm), storage components as well as an SFX PSU.

Due to slim form-factor, the CPU will have to use a cooler, which is no higher than 47 mm, which brings some limitations to TDP and almost certainly leaves no space for any tangible overclocking. Right now, Cryorig is trying to figure out how to best cool-down internal components of the chassis, which is why it does not share its own recommendations regarding CPUs and GPUs.

Cryorig Taku: Quick Specs

Dimensions (W×H×D)

567 mm × 134.8 mm × 207 mm

Weight

8 kilograms

Motherboard Form-Factor

Mini ITX

PSU Form-Factor

SFX

3.5" Drive Bays

1

2.5" Drive Bays

1 or 2

System Fan

TBD

CPU Cooler Dimensions

Up to 42 mm in height

Graphics Card Length

250 mm

PSU Length

130 mm

External Connectors

Power, Audio, USB 3.0, Display

Like the Ola, the Taku is also a work in progress with targeted release dates in late 2016 or the first quarter of 2017. Early prototypes will be demonstrated at Computex.

Gallery:

Cryorig Taku

Source:

Cryorig

Tweet

PRINT THIS ARTICLE

Post Your Comment

Please

log in

or

sign up

to comment.

POST A COMMENT

16 Comments

View All Comments

sharath.naik

- Thursday, May 26, 2016 -

link

This is a twist on Dan's A4 case. Except bigger, less flexibility for adding SSDs, less flexible in how you want to place this and needs active cooling. The need for active cooling does provide an option for dust filter that is the only advantage I see.

Reply

edzieba

- Friday, May 27, 2016 -

link

So... Nothing like the Dan A4? Different layout, different chassis style, different chassis shape, different airflow path... I suppose you can get them in the same colour.

Reply

sharath.naik

- Thursday, May 26, 2016 -

link

I would buy it though since A4 case still has no release date from Lian Li

Reply

iFreilicht

- Sunday, May 29, 2016 -

link

The A4 isn't sold by LianLi. It will be crowdfunded, the campaign is literally starting in 6 hours or so.

Reply

tipoo

- Thursday, May 26, 2016 -

link

Mac Pro form factor with an upgradable GPU capable of fitting a 1080?Pssst, Apple...This.

Reply

xype

- Friday, May 27, 2016 -

link

Is it still a "Mac Pro form factor" if it’s bigger? And not a small amount, either, height is 378 mm vs 251 mm, for example.

Reply

Psycownage

- Thursday, May 26, 2016 -

link

Are they working with the guys that designed the dune pc or did they just completely rip it off?

Reply

michael2k

- Thursday, May 26, 2016 -

link

And did the Dune PC just completely rip off the Mac Pro?

Reply

asuglax

- Thursday, May 26, 2016 -

link

And Jony Ive wants you to believe that every trash can ripped off the Mac Pro.

Reply

michael2k

- Friday, May 27, 2016 -

link

So you agree that the Mac Pro design was in fact copied by Dune PC? Myself, I think the Ola is distinct from the Dune (and Mac Pro) because Ola pulls in air from the sides where the Mac Pro and Dune pull in air from the bottom of the case. There are clear differences even between Mac Pro and Dune, as well, since the Mac Pro crams in 2 GPUs and not just a single.

Reply

1

2

PIPELINE STORIES

+ Submit News

AT Deals: Seasonic PRIME GX-750 PSU Now $91 at Newegg

Best AMD Motherboards: August 2021

Best Intel Motherboards: August 2021

MinisForum Unveils Cezanne EliteMini HX90 and Tiger Lake EliteMini TL50 mini-PCs

AT Deals: ViewSonic 27-Inch AdobeRGB WQHD Monitor Now $399

ASRock Rack Announces Two ATX Ice Lake SP Motherboards

Google Teases Pixel 6 and Pixel 6 Pro with new "Tensor" SoC

ASUS Unveils ROG Crosshair VIII Extreme Motherboard: Flagship X570

ASRock Unveils C621A WS Motherboard, Designed for Xeon W-3300 Workstations

AMD Announces Radeon RX 6600 XT: Mainstream RDNA2 Lands August 11th For $379

JEDEC Publishes LPDDR5X Standard at up to 8533 Mbps

AT Deals: Samsung 980 1TB SSD At New Low Price of $109

TWEETS

andreif7

:

@nottheengineer My XM3s also have the hiss. Also got a pair of Drop Pandas and they also have it.

IanCutress

:

@dweekly Video version too... :) https://t.co/TTXfugi8bQ

IanCutress

:

'Tech Breakthrough has been in development for years'Obvious headline is obvious. This is not 'news'. They don't... https://t.co/pBvST5VBKw

IanCutress

:

Upcoming article preview... :) https://t.co/3qCKcSwmkR

IanCutress

:

@YeNoname It was intentional :) And yeah, the goal of these interviews along with new product knowledge is to get a... https://t.co/P5DKO8bhTK

andreif7

:

@CDemerjian @amarvir02 @W00tMa5ter you mean 24?

IanCutress

:

For a Monday morning interview, @rebeccalipon is easily the most enthusiastic and energetic interviewee we've ever... https://t.co/938eOymfu3

RyanSmithAT

:

@DanMatte Speaking of display matters, did Sony ever explain what was going on with the console's HDMI bandwidth?

RyanSmithAT

:

RT @DanMatte: It’s starting to get alarmingly late in the game for Sony not to have VRR working yet on the PS5.

andreif7

:

@handleym99 It's got nothing to do with BT itself. It's because the anaemic DAC/amps are incredibly bad and have... https://t.co/6Hg6RqIeKh

andreif7

:

@centurio9 I'm shocked at the amount of people not hearing it.

andreif7

:

@elfary74 @shure That was a physical recording from an actual pair so dBFS isn't a valid metric, I don't have a pro... https://t.co/CO6hTiDbnR

RyanSmithAT

:

@IanCutress @Supercomputing Seeing as how I typically lose steak bets, I'm going to bet against myself on this one.... https://t.co/j4S5vw4Rgm

RyanSmithAT

:

@IanCutress The last time I did a system rebuild, I made a virtual machine of my previous system first. That helped... https://t.co/j7OqZFCWQ1

RyanSmithAT

:

It's taken a bit longer than usual, but AMD's Zen 3 (Cezanne) APUs are finally coming to the retail market.... https://t.co/4y5nJ9eyWB

ganeshts

:

@ricswi Looks like that requirement is Home-only. Other editions will still allow local accounts. I can't remember... https://t.co/qOvPnduAuY

ganeshts

:

@Laughing_Man @hnpn914 Benson, is there an update planned for the Twinkie PD to support EPR? I still use the USBC-T... https://t.co/D6g5nmQvB5

ganeshts

:

@bdmurdock Not aware of a standard way, but I have seen simulator wrapper scripts with a `timeout' prefix. Also o... https://t.co/aIgUTOeXcx

ganeshts

:

@mikeev @BrettHowse @IanCutress For games, a combination of Powershell + (WinAppDriver / AutoHotKey) works, but it... https://t.co/Fhh8j0VZLa

ganeshts

:

@mikeev @BrettHowse @IanCutress I use Perl & Python on RHEL for my primary work, and Powershell for all AnandTech-r... https://t.co/7uCllPz9T3

Follow

@

ANANDTECH

Populární články